Vacuum bag sealant tapes Economical multi-purpose sealant tape for forming high temp vacuuming bag with bagging films

Vacuum bag sealant tapes

Economical multi-purpose sealant tape

for forming high temp vacuuming bag with bagging films

Peter Lin
[email protected]
Whatsapp: +86 15013829504
WeChat: wecan365
Mobile: +86 15013829504
www.cncglass.com

Vacuum bag sealant tapes Economical multi-purpose sealant tape Yellow sealant tape

*Yellow sealant tape is an economical multi-purpose sealant tape with high temp resistance. It’s uitable for cure applications up to 400F(204C).
*Economical vacuum tape reduces the cost of vacuum bagging.
*Multi-purpose tape can be used on metal and composite tooling.
*Easy clean up reduces cost of tool cleaning.

Product Info:
Yellow
Synthetic rubber
Maximum use temperature: 400F(204%C)
Shelf life:12 months from date of manufacture
Tape must be stored flat in original packaging at 72F(22″C); Do not refrigerate
3 mmx 12 mm*15meters per roll

Application notes:
*For clean removal,it is recommended to strip the tape from the mold surface once it has cooled down to room temperature.
*The maximum use temperature depends upon the duration at maximum temperature, and we recommend clients testing prior to use.

thermal cutter, hot price ,heating cutter,
heating knife, heating trimmer for eva pvb sgp lamination
Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www_cncGlass_com www_cncEVA_com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www_cncGlass_com www_cncEVA_com

thermal cutter, hot price ,heating cutter,
heating knife, heating trimmer for eva pvb sgp lamination
Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www_cncGlass_com www_cncEVA_com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www_cncGlass_com www_cncEVA_com